Makita JV0600 Bedienungsanleitung PDF herunterladen (Seite 8)

Pin 2

Lock pin

Torsion spring 10

Insert holder

[3] DISASSEMBLY/ASSEMBLY

[3]-3. Slider section, Toolless Blade Clamp Mechanism

DISASSEMBLING

(1) Disassemble Lever 8, Base, Housing cover, Safety wire as illustrated in Fig. 2. And then, remove Housing set (R)

as illustrated in Fig. 3.

(2) Take out Slider section as illustrated in Fig. 4.

(3) The Slider section can be disassembled as illustrated in Fig. 11.

(4) Rod assembly (Toolless blade clamp mechanism) is disassembled as illustrated in Fig. 12.

1. Separate Rod assembly

from Slider by taking off

Stop ring E-3 and Pin 4.

2. Remove Slider guide from

Slider. And Slider support,

Seal plate are removed from

Rod assembly.

Urethane sponge sheet

can be removed from

Seal plate.

Pin 4

Slider

Rod assembly

Stop ring E-3

Slider guide

Slider support

Seal plate

Rod assembly

Slider

Urethane

Sponge sheet

Seal plate

Fig. 11

Fig. 12

1. Remove Dust cover from

Insert holder.

Retaining ring R-13 in

Insert holder comes into

your sight.

2. Remove Retaining

ring R-13 from the

inside of Insert holder

as illustrated below.

3. Standing Rod assembly

on the work table, push

down Insert holder as

illustrated blow.

4. Now rod assembly (Toolless blade clamp mechanism) is disassembled as illustrated below.

Insert

holder

Dust cover

Compression spring 4

Rod

1R381

1R173

Retaining

ring R-13

Retaining

ring R-13

Insert

holder

Work table

Repair

P 8/ 12

1 2 3 4 5 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare

Makita JV0600 Bedienungsanleitung Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kreissägen Makita JV0600