Makita HR5211C Bedienungsanleitung PDF herunterladen (Seite 7)

P 7 / 24

[3] DISASSEMBLY/ASSEMBLY

[3] -3. Tool Holder Section and Barrel Complete

Repair

DISASSEMBLY

1) To come to the Stage of Fig. 14, do the following steps.

1. Separate Chuck and Barrel section and Gear housing cover from Crank housing complete. (Fig. 7)

2. Remove Impact bolt, Slide sleeve, etc. from Tool holder B by pushing with screwdriver or the like. (Fig. 8)

3. Disassemble Chuck section. (Figs. 3, 4, 5 and 6)

2) Disassemble Tool holder section from Barrel complete. (Fig. 14)

3) Separate Tool holder B from Tool holder A in the order from Fig. 15 to 17.

Fig. 14

Fig. 15

Fig. 17

Fig. 16

Tool

holder A

Ring spring 44

1R212

1R003

Remove Ring spring 44 using 1R003 and 1R212,

and then remove Ring 47.

Remove Pin 10 which works as a jointer for

Tool holders A and B.

Remove Flat washers and Urethane

ring from Tool holder B.

Disassemble Tool holder section by striking the tip of Tool holder A.

Strike the Tool holder B at the illustrated portion.

Now Tool holder B can be separated from Tool

holder A.

O ring 32 can be removed

from Tool holder A.

Flat washer 57

Urethane ring 57

Flat washer 57

Tool Holder A

Tool Holder B

Ring 47

Barrel

complete

Tool

holder B

Tool Holder

Section

Tool

holder A

Ring 47

Pin 10: 4 pcs.

Barrel

complete

Tool holder A

Tool holder B

Tool

holder B

Tool holder A

O ring 32

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare

Makita HR5211C Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Rotationshämmer Makita HR5211C