Makita HR5211C Bedienungsanleitung PDF herunterladen (Seite 4)

P 4 / 24

[3] DISASSEMBLY/ASSEMBLY

[3] -1. Chuck Section

Repair

DISASSEMBLY

ASSEMBLY

Do the reverse of disassembling steps.

Tapping

screw 5x25: 6pcs.

Lead unit

1R350

Remove six 5x25 Tapping screws, and disconnect Lead unit from

Controller. Now Handle section can be separated from the Machine.

And remove Power supply cord with Cord clamp base.

Controller

Cord clamp base

Power supply cord

Tool holder cap

Chuck cover

Remove Tool holder cap with a slotted

screwdriver.

Handle section

Chuck section can be disassembled in the order from Fig. 2 to 6.

Fig. 2

Fig. 3

Fig. 4 Fig. 5

Fig. 6

Ring Spring 25

Flat Washer 28

Put Ring spring 25 out of the ring installation groove on Tool holder

using 1R003 and 1R212. Then remove the Ring spring 25 from

Tool holder. Now Flat washer 28, Chuck cover and Spacer can be

removed.

Remove the other Ring spring 25 using

1R003 and 1R212. Now Chuck ring and

Release cover can be removed.

Chuck Ring

Release

Cover

Chuck Cover

Tool Retainer: 2psc.

Remove two Tool retainers while pushing down Spring guide toward Barrel cover side.

Spring guide and Compression spring 49 can be removed from Tool holder A.

Spring Guide

Compression

Spring 49

Spacer

Ring Spring 25

1R212

1R003

Tool

Holder A

1 2 3 4 5 6 7 8 9 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare

Makita HR5211C Bedienungsanleitung Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Rotationshämmer Makita HR5211C