Makita LS1216 Bedienerhandbuch PDF herunterladen (Seite 6)

27. Do not use the saw to cut other than wood,

aluminum or similar materials.

28. Connect miter saws to a dust collecting device

when sawing.

29. Select saw blades in relation to the material to

be cut.

30. Take care when slotting.

31. Replace the kerf board when worn.

32. Do not use saw blades manufactured from

high speed steel.

33. Some dust created from operation contains

chemicals known to cause cancer, birth

defects or other reproductive harm. Some

examples of these chemicals are:

• lead from lead-based-painted material and,

• arsenic and chromium from

chemically-treated lumber.

Your risk from these exposures varies,

depending on how often you do this type

of work. To reduce your exposure to these

chemicals: work in a well ventilated area

and work with approved safety equipment,

such as those dust masks that are

specially designed to filter out

microscopic particles.

34. To reduce the emitted noise, always be sure

that the blade is sharp and clean.

35. The operator is adequately trained in the use,

adjustment and operation of the machine.

36.

Use correctly sharpened saw blades. Observe

the maximum speed marked on the saw blade.

37. Refrain from removing any cut-offs or other

parts of the workpiece from the cutting area

whilst the tool is running and the saw head is

not in the rest position.

38. Use only saw blades recommended by the

manufacturer which conform to EN847-1.

39. Wear gloves for handling saw blade (saw

blades shall be carried in a holder wherever

practicable) and rough material.

40. When fitted with laser, no exchange with

different type of laser is permitted. Repairs

shall only be carried out correctly.

SAVE THESE INSTRUCTIONS.

INSTALLATION

Bench mounting

009483

When the tool is shipped, the handle is locked in the

lowered position by the stopper pin. Release the stopper

pin by simultaneously applying a slight downward

pressure on the handle and pulling the stopper pin.

WARNING:

• Ensure that the tool will not move on the

supporting surface. Movement of the miter saw

on the supporting surface while cutting may result

in loss of control and serious personal injury.

010593

This tool should be bolted with four bolts to a level and

stable surface using the bolt holes provided in the tool's

base. This will help prevent tipping and possible injury.

FUNCTIONAL DESCRIPTION

WARNING:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking

function on the tool. Failure to switch off and

unplug the tool may result in serious personal

injury from accidental start-up.

1. Hex bolts

1. Stopper pin

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

Makita LS1216 Bedienerhandbuch Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gehrungssägen Makita LS1216