Makita LS1216 Bedienerhandbuch PDF herunterladen (Seite 13)

movement and severe vibration resulting in

possible loss of control during operation and in

serious personal injury.

To install the blade, mount it carefully onto the spindle,

making sure that the direction of the arrow on the

surface of the blade matches the direction of the arrow

on the blade case.

009524

Install the outer flange and hex bolt, and then use the

socket wrench to tighten the hex bolt (left-handed)

securely counterclockwise while pressing the shaft lock.

Return the blade guard and center cover to its original

position. Then tighten the hex bolt clockwise to secure

the center cover. Release the handle from the raised

position by pulling the stopper pin. Lower the handle to

make sure that the blade guard moves properly. Make

sure the shaft lock has released spindle before making

cut.

Dust bag

009501

The use of the dust bag makes cutting operations

cleaner and dust collection easier. To attach the dust

bag, fit it onto the dust nozzle.

When the dust bag is about half full, remove the dust

bag from the tool and pull the fastener out. Empty the

dust bag of its contents, tapping it lightly so as to remove

particles adhering to the insides which might hamper

further collection.

NOTE:

If you connect a vacuum cleaner to your saw, cleaner

operations can be performed.

Dust box (Optional accessory)

006793

Insert the dust box into the dust nozzle.

Empty the dust box when necessary.

To empty the dust box, open the cover by pushing the

button and dispose of the sawdust. Return the cover to

the original position and lock it in place. Dust box can

easily be removed by pulling it out while turning it near

the dust nozzle on the tool.

NOTE:

• If you connect a Makita vacuum cleaner to this tool,

cleaner operations can be performed.

NOTICE:

• Empty the dust box before collected sawdust level

reaches the cylinder section.

010592

010591

Securing workpiece

WARNING:

• It is extremely important to always secure the

workpiece correctly with the proper type of vise

or crown molding stoppers. Failure to do so may

result in serious personal injury and cause damage

to the tool and/or the workpiece.

• After a cutting operation do not raise the blade

until it has come to a complete stop. The raising

1. Cylinder section

2. Dust box

1. Cylinder section

2. Dust box

3. Sawdust

1. Dust box

2. Cover

3. Button

1. Fastener

2. Dust bag

3. Dust nozzle

1. Hex bolt

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

Makita LS1216 Bedienerhandbuch Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gehrungssägen Makita LS1216