Makita EK7650H Bedienerhandbuch PDF herunterladen (Seite 22)

Changing the cutting attachment position

(central/side)

Mounting direction of hood

The Power Cutter’s cutting attachment is mounted in the •

direction shown in Fig. A. If desired, use the following procedure

to mount it in the direction shown in Fig. B.

Mounting in direction B

(1) Loosen tightening nut, and turn tension adjustment screw to

the left until the end of the screw is visible. (Fig. 1)

(2) Remove tightening nuts and remove belt cover. (Fig. 1)

(3) Rotate the hood to the broken line position. Remove V-belt

and then remove cutting attachment from the Power Cutter.

Reposition the grip. (Fig. 2)

(4) Pick up the lock shaft with a slotted screwdriver or a plier.

(Fig. 3)

(5) Rotate the arm until it contacts the grip and return the lock

shaft to the original position by hand. (Fig. 4)

Reposition the grip. (Fig. 5)

(6) Turn over the removed cutting attachment, pass bolt through

hole, and remount in direction B.

Remount the V-belt to the pulley. (Fig. 6)

(7) Mount belt cover. (Fig. 7)

Turn the tension adjustment screw to adjust the tension of the

V-belt. Once tension adjustment is nished, rmly tighten the

tightening nut.

Hex. nuts

Hood

V-belt

Lock shaft

V-belt

Pulley

Bolts

Belt cover

Hex. nut

Holes

Tension adjustment screw

Mounting direction

Belt cover

End of screw

A B

Fig. 1

Fig. 2

Fig. 3

Fig. 5 Fig. 6 Fig. 7

Plier

Relocate

Bolts

Grip

Arm

Grip

Fig. 4

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 103 104

Kommentare zu diesen Handbüchern

Keine Kommentare

Makita EK7650H Bedienerhandbuch Seite 22

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gartenwerkzeuge Makita EK7650H