Makita JR102D Bedienungsanleitung PDF herunterladen (Seite 7)

P 7/ 12

Repair

[3] DISASSEMBLY/ASSEMBLY

[3] -3. Toolless Blade Holder Section (Model JR100D)

DISASSEMBLING

ASSEMBLING

(1) Disassemble Housing (R) from Housing (L) and remove Gear housing section from Housing (L) (Fig. 2, 3).

(2) Remove Shoe from Gear section by unscrewing M4x10 Countersunk head screws (Fig. 3).

(3) Disassemble Toolless blade holder section (Fig. 12).

(1) Assemble Blade guide to Slider (Fig. 9) in case Blade guide is removed from Slider.

(2) Mount Torsion spring 17 and Connecting sleeve to Blade guide. And then, inert Compression spring 2 and

push pin (Fig. 13).

Fig. 13

Blade guide

Torsion spring 17

1. Assemble Torsion spring 17 to Blade guide by inserting its

long tail into the slit of Blade guide. And insert the short tail

of the Torsion spring into the hole of Connecting sleeve.

Connecting sleeve

Push pin

2. Insert Compression spring 2 and Push pin

into the slit of Blade guide.

long tail

short tail

Compression spring 2

Connecting sleeve

Blade guide

Fig. 12

1. Remove Protector and

Retaining ring 16 by

levering it up with

Slotted screwdriver.

3. Remove Guide sleeve, Connecting

sleeve, Push pin, Compression

spring 2 and Torsion spring 17 from

Blade guide.

2. Remove Driving sleeve slowly,

while paying attention that Shoulder

pin is not slung by Compression

spring 6.

Remove Pin 3, Shoulder pin 5 and

Compression spring 6 from Guide

sleeve.

Protector

Driving

sleeve

Pin 3

Shoulder pin 5

Push pin

Guide sleeve

Connecting sleeve

Compression

spring 6

Compression spring 2

Torsion spring 17

Retaining ring 16

1 2 3 4 5 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare

Makita JR102D Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kabellose Kettensägen Makita JR102D