Makita HR4510C Bedienerhandbuch

1 ENGLISH INSTRUCTION MANUAL DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUT

10

11

12 Makita Corporation 884742-2

2 ENGLISH SPECIFICATIONS Model HR4501C HR4510C HR4511C Carbide-tipped bit 45 mm Capacities Core bit 125 mm No load speed (min-1) 130 - 280 Blows per

3 operating power tools may result in serious personal injury. 10. Use safety equipment. Always wear eye protection. Safety equipment such as dust ma

4 8. Always be sure you have a firm footing. Be sure no one is below when using the tool in high locations. 9. Hold the tool firmly with both hands.

5 54321Number on adjusting dialRevolutions per minuteBlows per minute2802602001501302,7502,5501,9501,4501,250 008417 CAUTION: • If the tool is oper

6 CAUTION: • Do not rotate the change lever when the tool is running under load. The tool will be damaged. • To avoid rapid wear on the mode change

7 Installing or removing the bit 21 003150 Clean the bit shank and apply bit grease before installing the bit. Insert the bit into the tool. Turn th

8 Depth gauge 12 006323 The depth gauge is convenient for drilling holes of uniform depth. Loosen the clamp screw and adjust the depth gauge to the

9 ACCESSORIES CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any oth