Makita 9207SPB Bedienungsanleitung PDF herunterladen (Seite 3)

ENGLISH (Original instructions)

Explanation of general view

1-1. Switch trigger

1-2. Lock button

2-1. Speed change switch

3-1. Side grip

4-1. Wool bonnet

4-2. Lock nut

4-3. Rubber pad

7-1. Limit mark

8-1. Screwdriver

8-2. Brush holder cap

SPECIFICATIONS

Model 9207SPB

Max. capacities Wool bonnet 180 mm

Spindle thread M14

Rated speed (n)/No load speed (n

) 4,100 min

-1

Overall length 455 mm

Net weight 3.4 kg

Safety class /II

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

ENE051-1

Intended use

The tool is intended for polishing, smoothing before

painting, finishing surfaces, and removing rust and paint.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined

according to EN60745:

Sound pressure level (L

) : 86 dB(A)

Sound power level (L

) : 97 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Work mode : polishing

Vibration emission (a

h,P

) : 5.0 m/s

Uncertainty (K) : 1.5 m/s

ENG902-1

•

The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

• The declared vibration emission value is used for

main applications of the power tool. However if the

power tool is used for other applications, the

vibration emission value may be different.

WARNING:

•

The vibration emission during actual use of the power

tool can differ from the declared emission value

depending on the ways in which the tool is used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-16

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible manufacturer

declare that the following Makita machine(s):

Designation of Machine:

Polisher

Model No./ Type: 9207SPB

are of series production and

Conforms to the following European Directives:

2006/42/EC

And are manufactured in accordance with the following

standards or standardised documents:

EN60745

The technical documentation is kept by:

Makita International Europe Ltd.

Technical Department,

Michigan Drive, Tongwell,

Milton Keynes, Bucks MK15 8JD, England

1 2 3 4 5 6 7 8 ... 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare

Makita 9207SPB Bedienungsanleitung Seite 3

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Schleifmaschinen Makita 9207SPB