Makita HR2600 Bedienerhandbuch PDF herunterladen (Seite 9)

Installing or removing the bit

003150

Clean the bit shank and apply bit grease before installing

the bit.

010714

Insert the bit into the tool. Turn the bit and push it in until it

engages.

After installing, always make sure that the bit is securely

held in place by trying to pull it out.

To remove the bit, pull the chuck cover down all the way

and pull the bit out.

010715

Bit angle (when chipping, scaling or

demolishing)

For Models HR2310T, HR2610, HR2610T, HR2611F,

HR2611FT

010727

The bit can be secured at the desired angle. To change

the bit angle, rotate the action mode changing knob to

the O symbol. Turn the bit to the desired angle.

Rotate the action mode changing knob to the

symbol.

Then make sure that the bit is securely held in place by

turning it slightly.

010728

Depth gauge

The depth gauge is convenient for drilling holes of

uniform depth.

010716

Press the lock button on the grip base in the direction of

arrow shown in the figure and with the lock button being

pressed insert the depth gauge into the hex. hole in the

grip base

010717

At this time, the depth gauge needs to be inserted so that

its toothed side is directed to the toothed side of hex hole

marking on the grip base as shown in the figure.

1. Toothed side of

hex hole

marking on the

grip base

2. Toothed side of

the depth gauge

1. Grip base

2. Lock button

3. Depth gauge

1. Action mode

changing knob

1. Bit

2. Chuck cover

1. Bit

1. Bit shank

2. Bit grease

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

Makita HR2600 Bedienerhandbuch Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Rotationshämmer Makita HR2600