Makita HR2600 Bedienerhandbuch

1 ENGLISH (Original instructions) INSTRUCTION MANUAL DOUBLE INSULATION IMPORTANT: Read Before Using. Rotary Hammer /Combination Hammer HR2300 HR2310

10 1 010718 Adjust the depth gauge to the desired depth by moving it back and forth while pressing the lock button. After the adjustment, release the

11 12345 012895 12 012896 NOTE: • When installing or removing the dust cup, the cap may come off the dust cup. At that time, proceed as follows. Re

12 After drilling the hole, use the blow-out bulb to clean the dust out of the hole. Chipping/Scaling/Demolition For Models HR2310T, HR2610, HR2610T,

13 Diamond core drilling When performing diamond core drilling operations, always set the change lever to the position to use "rotation only&quo

14

15

16 Makita CorporationAnjo, Aichi, Japanwww.makita.com 884939A229

2 ENGLISH (Original instructions) SPECIFICATIONS Model HR2300HR2310THR2600 HR2601 HR2610HR2610T HR2611FHR2611FT Concrete 23 mm 26 mm Core bit 68 mm

3 Model HR2310T Work mode : hammer drilling into concrete Vibration emission (ah,HD) : 15.5 m/s2 Uncertainty (K) : 1.5 m/s2 Work mode : chise

4 Conforms to the following European Directives: 2006/42/EC And are manufactured in accordance with the following standards or standardised documents:

5 Personal safety 11. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are ti

6 warm-up, hammering operation is difficult. 8. Always be sure you have a firm footing. Be sure no one is below when using the tool in high locations

7 Reversing switch action BA1 010722 CAUTION: • Always check the direction of rotation before operation. • Use the reversing switch only after the

8 For Models HR2310T, HR2610, HR2610T, HR2611F, HR2611FT Rotation with hammering 12 010724 For drilling in concrete, masonry, etc., rotate the action

9 Installing or removing the bit 21 003150 Clean the bit shank and apply bit grease before installing the bit. 1 010714 Insert the bit into the tool