Makita HM1211B Spezifikationen PDF herunterladen (Seite 6)

FUNCTIONAL

DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on the

tool.

Switch action

CAUTION:

• Before plugging in the tool, always check to see that the

switch trigger actuates properly and returns to the “OFF”

position when released.

To start the tool, simply pull the switch trigger. Release the

switch trigger to stop.

ASSEMBLY

CAUTION:

• Always be sure that the tool is switched off and

unplugged before carrying out any work on the tool.

Side handle (auxiliary handle)

The side handle swings around 360° on the vertical as well

as back and forth on the horizontal. Turn the clamp nut clock-

wise to secure the handle in the desired position.

Installing or removing the bit

There is a raised dimple on one of the faces of the tool

retainer handle where you grip it. Pull out and then turn the

tool retainer so that the dimple faces toward the large open-

ing in the end of the tool (tool holder). The shank of the bit is

then inserted into the tool holder with the notched portion on

the shank facing back toward the tool retainer. Insert the bit

into the tool holder as far as it will go.

1. Switch trigger

003502

1. Clamp nut

2. Side handle

002905

1. Bit

2. Dimple faces

3. Tool retainer

4. Notched portion

002924

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Keine Kommentare

Makita HM1211B Spezifikationen Seite 6