Makita 5012B Bedienerhandbuch PDF herunterladen (Seite 17)

Removing chip buildup

Chips and sawdust will build up in the guide bar groove and oil hole, clogging them and

impairing oil flow. Remove the guide bar and clean them out.

Guide

bar

Fig.

Replacing carbon brushes

Remove and check the carbon brushes

regularly. Replace when they wear down

to the limit mark. Keep the carbon brushes

clean and free to slip in the holders. Both

carbon brushes should be replaced

the

same time. Use only Makita carbon brushes.

Use

screwdriver to remove the brush

holder caps. Take out the worn carbon

brushes, insert the new ones and secure the

brush holder caps.

Clean

out

Limit

mark

Fig.

Storing

the

tool

Before storing the tool, be sure to do the following:

Remove the chain cover. Remove any chips and sawdust from the tool.

Install the chain cover. Turn the tool on and depress the oil button

times.

*Cover the saw chain and the guide bar with the scabbard.

maintain product SAFETY and RELIABILITY, repairs, any other maintenance or

adjustment should

be performed by Makita Authorized or Factory Service Centers,

always using Makita replacement parts.

1 2 ... 12 13 14 15 16 17 18 19 20

Keine Kommentare

Makita 5012B Bedienerhandbuch Seite 17