Makita LS1045 Bedienerhandbuch PDF herunterladen (Seite 11)

Positioning for adjusting the bevel angle

The saw blade tilts up to

45"

to the left. To adjust the bevel angle, loosen the lever at the

rear

the

tool.

Tilt

the

blade

the

left

that the pointer indicates the desired angle

the bevel scale. Then tighten the lever firmly to secure the arm

Lever

Bevel

scale

Pointer

CAUTION

When tilting the saw blade, be sure to raise the handle fully

Securing workpiece

Whenever possible, secure the workpiece with the optional vise.

you must use your

hand to hold the workpiece, then

must be done firmly and securely

as not to lose con-

trol of the workpiece. Your hand and arm must be kept well away from the blade area

(4"

minimum). Squeeze the workpiece firmly against the guide fence with your fingers held

over the top of the guide fence. The workpiece must also rest steadily on the turn base.

WARN

Never use your hand to hold the workpiece that requires your hand to be any closer than

from the blade area. In this case, always use the optional vise to secure the workpiece.

After any cutting operation, raise the blade gently. Never raise the blade until

has come

complete stop. Serious injury may result.

Vertical vise (optional accessory)

The vertical vise can be installed on the guide fence or the holder assembly (optional

accessory).

Insert the vise rod into the hole in the

guide fence or holder assembly and

tighten the screw

secure the vise rod.

Position the vise arm according to the

thickness and shape of the workpiece

and secure the vise arm by tightening

the screw. Press the workpiece flat

against the guide fence and the turn

base. Position of the workpiece at the

desired cutting position and secure it

firmly by tightening the clamp screw.

-Vise

arm

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 26 27

Kommentare zu diesen Handbüchern

Keine Kommentare

Makita LS1045 Bedienerhandbuch Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gehrungssägen Makita LS1045