Makita BHR240 Bedienungsanleitung PDF herunterladen (Seite 6)

Rotation only

For drilling in wood, metal or plastic materials, depress

the lock button and rotate the action mode changing

knob to the symbol. Use a twist drill bit or wood bit.

Hammering only

For chipping, scaling or demolition operations, depress

the lock button and rotate the action mode changing

knob to the symbol. Use a bull point, cold chisel, scal-

ing chisel, etc.

CAUTION:

• Do not rotate the action mode changing knob when

the tool is running. The tool will be damaged.

• To avoid rapid wear on the mode change mecha-

nism, be sure that the action mode changing knob

is always positively located in one of the three

action mode positions.

Torque limiter

The torque limiter will actuate when a certain torque level

is reached. The motor will disengage from the output

shaft. When this happens, the bit will stop turning.

CAUTION:

• As soon as the torque limiter actuates, switch off

the tool immediately. This will help prevent prema-

ture wear of the tool.

• Hole saws cannot be used with this tool. They tend

to pinch or catch easily in the hole. This will cause

the torque limiter to actuate too frequently.

ASSEMBLY

CAUTION:

• Always be sure that the tool is switched off and the

battery cartridge is removed before carrying out

any work on the tool.

Side grip (auxiliary handle)

CAUTION:

• Always use the side grip to ensure operating safety.

Install the side grip so that the teeth on the grip fit in

between the protrusions on the tool barrel. Then tighten

the grip by turning clockwise at the desired position. It

may be swung 360° so as to be secured at any position.

Bit grease

Coat the bit shank head beforehand with a small amount

of bit grease (about 0.5 -1 g; 0.02 - 0.04 oz.). This chuck

lubrication assures smooth action and longer service life.

Installing or removing the bit

Clean the bit shank and apply bit grease before installing

the bit.

Insert the bit into the tool. Turn the bit and push it in until

it engages.

1. Rotation only

1. Hammering only

007043

007044

1. Grip base

2. Side grip

3. Loosen

4. Tighten

5. Teeth

6. Protrusion

1. Bit shank

2. Bit grease

1. Bit

2. Chuck cover

007045

001296

007342

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

Makita BHR240 Bedienungsanleitung Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kabellose Kombibohrer Makita BHR240