Makita JV0600 Bedienungsanleitung PDF herunterladen

PRODUCT

CONCEPT AND MAIN APPLICATIONS

P 1/ 12

Specification

Standard equipment

Note: The standard equipment for the tool shown above may differ by country.

Description Jig Saw

Model No. JV0600

Model JV0600 has been developed as a jig saw to cover

the midrange class that had not been in our range.

Its main features are:

• Compact and lightweight design has been achieved

without losing strong power nor high maneuverability

• New toolless blade clamp for quick blade changes

• Rigid aluminum support housing with blow-off device

added to protect the rod portion from saw dust for

enhanced performance against dust.

Jig saw blade No. B-10 ......... 1

Hex wrench 3 ........................ 1

Guide rule set ........................ 1 (for some countries only)

Plastic carrying case ............. 1

Optional accessories

Guide rule set

Kerf board set

Hose 28-1.5

Hose 28-3.0

Jig saw blades

Cover plate

120

110

220

230

240

6.2 650

---

380 60050/60

3.1 650 380 60050/60

3.0 650 380 60050/60

2.9 650 380 60050/60

6.5 380 60050/60

Continuous Rating (W)

Voltage (V) Cycle (Hz)

Input Output

Max. Output (W)

Current (A)

Dimensions: mm (")

Width (W)

Height (H)

Length (L)

236 (9-1/4)

77 (3)

199 (7-7/8)

* When cutting with optional blade No. B-16L

Weight according to

EPTA-Procedure 01/2003: kg (lbs)

2.4 (5.2)

No load speed: strokes per min.

Aluminum

Capacities: mm (")

Wood*

20 (25/32)

Steel 10 (3/8)

Stroke length: mm (") 23 (7/8)

Shank type

Protection against electric shock

Power supply cord: m (ft)

Europe: 4.0 (13.1), Australia, Brazil: 2.0 (6.6),

Other countries: 2.5 (8.2)

Double insulation

Variable speed control by dial Yes

10.5

Housing type

Cut settings

Vibration measured according to

EN60745-2-11: m/s²

3 Orbital settings + Straight cutting

Yes

Material of base

Toolless blade change

500 - 3,100

B-type

90 (3-1/2)

Clamshell type

Aluminum

ECHNICAL INFORMATION

1 2 3 4 5 6 ... 11 12

Inhaltsverzeichnis

Seite 1 - ECHNICAL INFORMATION

PRODUCTCONCEPT AND MAIN APPLICATIONSP 1/ 12SpecificationStandard equipmentNote: The standard equipment for the tool shown above may differ by country.

Seite 2 - [2] LUBRICATIONS

P 10/ 12Repair[3] DISASSEMBLY/ASSEMBLY[3]-3. Slider section, Tool less Blade Clamp Mechanism ASSEMBLING(2) Assemble Toolless mechanism to Slider (Fig.

Seite 3 - [3]-1. Housing

Circuit diagramP 11/ 12Fig. D-1 WhiteOrangeBlueNoise SuppressorSwitchControllerFieldBrush holder ABrush holder BPower Supply CordThis Lead wire is

Seite 4 - [3]-2. Crank Mechanism

Wiring diagramFig. D-2 Fig. D-3 Housing LRoute the Lead wires in between the Ribs settingController and Terminal block.Note: Do not let Lead wires cro

Seite 5

RepairCAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”.[1] NECESSARY REPAIRING TOOLS[2] LUBRICATIONSFig.

Seite 6

[3] DISASSEMBLY/ASSEMBLY[3]-1. HousingDISASSEMBLING1. Inserting Slotted head screwdriver into the cut portion, remove Lever 8 by levering up it

Seite 7 - P 7/ 12

[3] DISASSEMBLY/ASSEMBLY[3]-1. HousingDISASSEMBLINGASSEMBLING6. Now Housing set (R) can be separated from Housing set (L), by unscrewing ten 4x1

Seite 8 - P 8/ 12

[3] DISASSEMBLY/ASSEMBLY[3]-2. Crank MechanismDISASSEMBLING4. Disconnect Carbon brush from Commutator. (3) Crank section and Armature are separated

Seite 9 - P 9/ 12

[3] DISASSEMBLY/ASSEMBLY[3]-2. Crank MechanismASSEMBLINGFig. 7(1) Assemble Armature to Bearing case complete. Refer to the lower illustrations in Fig

Seite 10 - [3] DISASSEMBLY/ASSEMBLY

[3] DISASSEMBLY/ASSEMBLY[3]-2. Crank MechanismASSEMBLINGFig. 9Fig. 10Slider guide plateMount Slider guide plate,facing its short leg to Housingset (L)

Seite 11 - Circuit diagram

Pin 2Lock pinTorsion spring 10Insert holder[3] DISASSEMBLY/ASSEMBLY[3]-3. Slider section, Toolless Blade Clamp Mechanism DISASSEMBLING(1) Disassemble

Seite 12 - Wiring diagram

[3] DISASSEMBLY/ASSEMBLY[3]-3. Slider section, Toolless Blade Clamp Mechanism ASSEMBLING(1) Assemble Blade clamp mechanism as illustrated in Fig. 13.1