Makita HR2810T Bedienerhandbuch PDF herunterladen (Seite 6)

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function

on the tool.

Switch action

008204

CAUTION:

• Before plugging in the tool, always check to see

that the switch trigger actuates properly and

returns to the "OFF" position when released.

To start the tool, simply pull the switch trigger. Tool

speed is increased by increasing pressure on the switch

trigger. Release the switch trigger to stop.

Lighting up the lamps

For Models HR2811F, HR2811FT

008235

CAUTION:

• Do not look in the light or see the source of light

directly.

To turn on the lamp, pull the trigger. Release the trigger

to turn it off.

NOTE:

• Use a dry cloth to wipe the dirt off the lens of lamp.

Be careful not to scratch the lens of lamp, or it

may lower the illumination.

Reversing switch action

008205

This tool has a reversing switch to change the direction

of rotation. Depress the reversing switch lever from the

A side for clockwise rotation or from the B side for

counterclockwise rotation.

CAUTION:

• Always check the direction of rotation before

operation.

• Use the reversing switch only after the tool comes

to a complete stop. Changing the direction of

rotation before the tool stops may damage the tool.

• When you operate the tool in counterclockwise

rotation, the switch trigger is pulled only halfway

and the tool runs at half speed.

Changing the quick change chuck for SDS-

plus

For model HR2810T, HR2811FT

The quick change chuck for SDS-plus can be easily

exchanged for the quick change drill chuck.

Removing the quick change chuck for SDS-plus

008233

CAUTION:

• Before removing the quick change chuck for SDS-

plus, always remove the bit.

Grasp the change cover of the quick change chuck for

SDS-plus and turn in the direction of the arrow until the

change cover line moves from the

symbol to the

symbol. Pull forcefully in the direction of the arrow.

1. Quick change

chuck for SDS-

plus

2. Change cover

line

3. Change cover

1. Reversing

switch lever

1. Lamp

1. Switch trigger

1 2 3 4 5 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare

Makita HR2810T Bedienerhandbuch Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Rotationshämmer Makita HR2810T