Makita BHR162 Bedienungsanleitung PDF herunterladen (Seite 9)

P 9 / 12

Repair

[3] DISASSEMBLY/ASSEMBLY

[3] -4. Inner Housing Complete (cont.)

Fig. 27 Fig. 28

2) Mount Compression spring 3 in place by connecting one end to the projection of Stopper plate and the other to

the projection of Change plate. (Fig. 27)

Important: Do not assemble as illustrated in Fig. 28.

ASSEMBLING

If assembled with the upper through

hole of Stopper plate placed under

the lower through hole of Change plate,

Change plate cannot slide.

Compression

spring 23

Compression spring 3

Change plate

Pin 4

Inner housing

Stopper plate

Change plate

Pin 4

Stopper

plate

Wrong Assembling

[3] -5. Tool Holder Section

DISASSEMBLING

Fig. 31

Fig. 32

Ring spring 22

1) Remove Tool holder complete from Inner housing complete. (Fig. 7 to Fig. 10 on page 4)

2) Remove Retaining ring WR-25, Flat washer 25, Compression spring 25, Spur gear 46 from Tool holder complete.

(Fig. 13 on page 5)

3) Set Tool holder complete between Armature holder set (No.1R038), and fix them in vise. (Fig. 29)

4) Apply slotted screwdriver to Ring spring 22 through the side hole of Tool holder. Strike the slotted screwdriver with

plastic hammer to remove Ring spring 22 from the groove on the inside surface of Tool holder complete.

Apply screwdriver through the other side hole, remove Ring spring 22 from the groove in the same way. (Fig. 29)

5) Ring spring 22 can be pulled off from Tool holder complete when completely removed from the groove. (Fig. 30)

Note: Ring spring 22 will be damaged or deformed in the steps 4) and 5). Be sure to replace damaged/deformed

Ring spring 22 when assembling Tool holder section.

6) Remove Impact bolt from Tool holder complete by

striking Tool holder complete against workbench.

(Fig. 31)

7) Remove Ring 11 and X ring 13 from Impact bolt.

(Fig. 32)

Fig. 29 Fig. 30

32mm

1R038

Tool holder

complete

Vise

Impact bolt

X Ring 13

Ring 11

Ring spring 22

Side hole of Tool

holder complete

1 2 3 4 5 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare

Makita BHR162 Bedienungsanleitung Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Rotationshämmer Makita BHR162