Makita JN3200 Spezifikationen PDF herunterladen (Seite 5)

FUNCTIONAL

DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and unplugged before

adjusting or checking function on the tool.

Permissible cutting thickness

The thickness of material to be cut depends upon the tensile strength of the

material itself. The groove on the die holder acts as a thickness gauge for

allowable cutting thickness. Do not attempt to cut any material which will not fit

into this groove.

Switch action

CAUTION:

• Before plugging in the tool, always check to see that the switch trigger

actuates properly and returns to the “OFF” position when released.

To start the tool, simply pull the switch trigger. Release the switch trigger to

stop.

For continuous operation, pull the switch trigger and then push in the lock but-

ton.

To stop the tool from the locked position, pull the switch trigger fully, then

release it.

ASSEMBLY

CAUTION:

• Always be sure that the tool is switched off and unplugged before

carrying out any work on the tool.

Punch replacement

Fit the wrench provided onto the lock nut and tap the handle lightly with a ham-

mer to loosen the lock nut. Take off the die holder and use a wrench to remove

the screw. Then remove the punch.

1. Stainless steel gauge 2.5 mm

(3/32”)

2. Mild steel gauge 3.2 mm (1/8”)

004776

Max.cutting capacities mm ga

Steel up to 400 N/mm

3.2 10

Steel up to 600 N/mm

2.5 13

Steel up to 800 N/mm

1.0 20

Aluminum up to 200 N/mm

3.5 10

006439

1. Lock button

2. Switch trigger

004778

1. Wrench

2. Lock nut

3. Die holder

004783

1 2 3 4 5 6 7 8

Kommentare zu diesen Handbüchern

Keine Kommentare

Makita JN3200 Spezifikationen Seite 5

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Elektrowerkzeuge Makita JN3200