Makita BTS130 Spezifikationen PDF herunterladen (Seite 11)

-8-

1. Safety Instructions

In the interest of promoting the safest and most efficient use of the Model WP 14DSL Cordless Oil Pulse

Driver by all our customers, it is very important when concluding a sale that the salesperson carefully

ensure that the buyer seriously recognizes the importance of the Handling Instructions, and fully

understands the precautions listed on the Caution Plate and Nameplate attached to each tool.

A. Handling instructions

Salespersons must be thoroughly familiar with the contents of the Handling Instructions in order to give

pertinent advice to the customers. In particular, they must possess a thorough understanding of the

precautions on using cordless tools that differ from those of ordinary electric power tools.

(1) Before use, ensure that the battery is fully charged.

A new battery is not fully charged. Even if the battery was fully charged at the factory, long periods of

inactivity, such as during shipment, cause the storage battery to lose its charge. Customers must be

instructed to fully charge the battery prior to use.

(2) To charge the storage battery, only use the dedicated Model UC 18YRSL Charger provided with the tool.

Given the design of the rapid-charging feature (for charging in about one hour), the use of other battery

chargers is hazardous.

(3) Follow the prescribed steps for using the charger.

First connect the Type BSL 1430 Storage Battery to the Model UC 18YRSL Charger, and then plug the

charger into an AC outlet (ensuring that the voltage matches that indicated on the unit). Reversing this

order may result in charger malfunction.

(4) Ensure the power source voltage is the same as that indicated on the charger’s nameplate.

The use of any other power source (e.g., DC outlet, fuel powered generator) will cause the charger to

overheat and burn out.

(5) Do not use any voltage-increasing equipment (e.g., transformer) between the power source and charger.

Using the charger with voltage higher than that indicated on the unit will result in malfunction.

(6) Conduct battery charging in an ambient temperature range of 0° to 40 °C (32 °F to 104 °F).

Special temperature-sensitive devices are employed in the charger to permit rapid charging. Ensure

that customers are instructed to use the charger within the indicated ambient temperature range. At

temperatures below 0 °C (32 °F), the thermostat will not function properly, and the storage battery may

be overcharged. At temperatures above 40 °C (104 °F), the storage battery cannot be sufficiently

charged. The optimum temperature range is 20 °C to 25 °C (68 °F to 77 °F).

(7) The battery charger should not be used continuously.

Charging more than three storage batteries in succession at high ambient temperature will cause the

temperature of coils on the transformer to rise, running the risk of the temperature fuse inside the

transformer inadvertently melting. After charging one battery, please wait at least 15 minutes before

charging the next battery.

PRECAUTIONS ON SALES PROMOTION

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 30 31

Keine Kommentare

Makita BTS130 Spezifikationen Seite 11