Makita 6343D Bedienungsanleitung PDF herunterladen (Seite 5)

Repair

P 5 / 8

(1) Removing drill chuck

Drill chuck has to be removed as follows.

1. Take off flat head screw M6x32 by turning it clockwise. See Fig.1.

(In case of disassembling housing, it is not necessary to take off the drill chuck.)

2.Hold the flat part of spindle with spanner or drill chuck extractor No.1R139. See Fig.1.

3. Turn the hex wrench fastened with drill chuck anti-clockwise.

1. In disassembling, be careful not to lose compression spring 4 in speed change

lever, because the spring jump out very often.

No.1R139

Drill chuck

extractor.

Flat head

screw M6x32

Vise

Hex wrench

(2) Disassembling housing

Fig.1

Fig.2

Speed change lever

Compression spring 4

< 1 > Disassembling

2. When removing housing bumper set from housing set, push the hook part of housing bumper

with such a tool as hex wrench 4 in direction of the arrow illustrated in Fig.3.

Housing

bumper set

Fig. 3

Housing

(L)

Housing

bumper set

Housing

(R)

1 2 3 4 5 6 7 8

Keine Kommentare

Makita 6343D Bedienungsanleitung Seite 5