Makita HM1111C Bedienungsanleitung PDF herunterladen (Seite 6)

[3] DISASSEMBLY/ASSEMBLY

[3]-2. Piston, Striker, Impact bolt

DISASSEMBLING

Fig. 6

Fig. 7

Disassemble Crank housing cover

by unscrewing M4x25 Hex socket

head bolt.

Separate Barrel section from Crank

housing by unscrewing four M6x30

Hex socket head bolts.

O ring 27 on Striker and Piston can

be replaced in this step.

Crank housing cover

Barrel section

O ring 27

(1) O ring 27 on Piston and Striker can be replaced as illustrated in Fig. 6.

(2) Remove Cylinder guide, Compression spring 40, Ring 39, Slide sleeve and Cylinder from Barrel section (Fig. 7).

Striker

Piston

Crank housing

2. Insert Slotted head screwdriver into

the side hole of Barrel complete,

then push Cylinder guide to remove

it from Barrel complete.

3. Compression spring 40, Ring 39

and Slide sleeve can be removed.

4. Remove Cylinder from Barrel complete.

M4x25 Hex socket

head bolt

M6x30 Hex socket

head bolt (4pcs.)

Barrel complete

Slide sleeve Ring 39

Compression

spring 40

Barrel complete

Cylinder

Cylinder guide

1. Remove two Ring springs 38

and Flat washer 40 from Cylinder

in order to remove Cylinder guide

in the next step.

Ring spring 38 (2pcs.)

flat washer 40

Cylinder

P 6/22

Repair

1 2 3 4 5 6 7 8 9 10 11 ... 21 22

Kommentare zu diesen Handbüchern

Keine Kommentare

Makita HM1111C Bedienungsanleitung Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Elektrowerkzeuge Makita HM1111C